Fujitsu PRIMERGY RX100 S7 - Removing the Defective RAID Card Cable; Removing the Riser Module 2

436 Upgrade and Maintenance Manual RX100 S7
Cables
16.11.3 Removing the riser module 2
Figure 324: Removing the riser module 2
Ê Carefully pull out the riser module 2 upward.
16.11.4 Removing the defective RAID card cable
Figure 325: Disconnecting the RAID card cable from the RAID controller
Ê Disconnect the RAID card cable from the RAID controller.