RX100 S7
Upgrade and Maintenance Manual 121
Power supply
6.3.1.3 Removing the dummy cover
I Remove the dummy cover before installing the second power supply
module.
Figure 39: Removing the dummy cover
Ê Press the two grips together as indicated by the arrows (1) and remove the
dummy cover (2).
V CAUTION!
Keep the dummy cover for future use. If the power supply module is
removed and not replaced with a new one, the dummy cover must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility), and to protect against fire.
1
0
0
To Next Page
Loading...
