RX100 S7
Upgrade and Maintenance Manual 311
13 Front panel
The front panel module consists of the front panel board, an operating panel and
a holder. These components are already pre-assembled.
The PRIMERGY RX100 S7 server’s chassis ID is stored on both the front panel
board and the system board. After replacing the front panel module, it is
necessary to program the ChassisID prom of the front panel board.
Beside the CPU temperature sensor and housing temperature sensor provided
on the system board, an ambient temperature sensor is also included on the
front panel board. In case of a defective ambient temperature sensor, please
replace the front panel board.
13.1 Replacing the front panel module
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
Field Replaceable Units (FRU)
Additional task duration for ChassisID Prom tool: 5 minutes
Average task duration: 10 minutes
To Next Page
Loading...
