RX100 S7
Upgrade and Maintenance Manual 279
11 Processor
V CAUTION!
●
Do not install unsupported processors. For further information on
supported processors, refer to section "Supported processors" on
page 279.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
When removing or installing the processor, be careful not to touch or
bend the spring contacts on the processor socket.
●
Never touch the underside of the processor. Even minor soiling such
as grease from the skin can impair the processor’s operation or
destroy the processor.
11.1 Supported processors
– one Intel
®
Quad-Core processor (Xeon E3-12xx/E3-1200v2 or E3-
12xxL/E3-12xxLv2) or one Intel
®
Dual-Core processor (Pentium or Core-i3)
I Information about different features of the model lines see section
"Model lines for RX100 S7" on page 30.
– one processor socket LGA 1155 (H2)
To Next Page
Loading...
