RX100 S7
Upgrade and Maintenance Manual 329
Management and diagnostics modules
14.3.1.3 Removing the riser module 1
Figure 219: Removing the riser module 1
Ê Carefully pull out the riser module 1 upward.
14.3.1.4 Removing the dummy cover
Figure 220: Removing the dummy cover
Ê Pull the dummy cover out of the bay.
V CAUTION!
Keep the dummy cover for future use. If the LSP is removed again and
not replaced with a new one, then the dummy cover must be reinstalled
due to cooling, the applicable EMC regulations (regulations on
electromagnetic compatibility) and fire protection.
To Next Page
Loading...
