Fujitsu PRIMERGY RX100 S7 - Installing the LSP; Removing the Dummy Cover

RX100 S7 Upgrade and Maintenance Manual 319
Management and diagnostics modules
14.2.1.3 Removing the dummy cover
Figure 210: Removing the dummy cover
Ê Pull the dummy cover out of the bay.
V CAUTION!
Keep the dummy cover for future use. If the LSP is removed again and
not replaced with a new one, then the dummy cover must be reinstalled
due to cooling, the applicable EMC regulations (regulations on
electromagnetic compatibility) and fire protection.
14.2.1.4 Installing the LSP
Figure 211: LSP