Fujitsu PRIMERGY RX100 S7 - Installing the Retaining Spring to the Dummy Cover; Installing the Dummy Cover

RX100 S7 Upgrade and Maintenance Manual 305
Optical disk drive
12.3.6 Installing the retaining spring to the dummy cover
Figure 203: Installing the retaining spring to the dummy cover
Ê Insert the retaining spring in the dummy cover (1).
Ê Fasten the retaining spring with two screws to dummy cover (2).
12.3.7 Installing the dummy cover
Figure 204: Installing the dummy cover (bottom side)
Ê Push the dummy cover inward until it engages at the right side.
/
0
0