390 Upgrade and Maintenance Manual
RX100 S7
Cables
16.2.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
16.2.3 Removing the defective front panel cable
Figure 266: Disconnecting the front panel cable
Ê Disconnect the front panel cable from the front panel module.
To Next Page
Loading...
