Fujitsu PRIMERGY RX100 S7 - Installing the Retaining Spring on the New ODD; Installing the New ODD; Connecting the Cables to the ODD; Concluding Steps

RX100 S7 Upgrade and Maintenance Manual 309
Optical disk drive
12.4.6 Installing the retaining spring on the new ODD
Ê Install the retaining spring as described in section "Installing the retaining
spring on the ODD" on page 300.
12.4.7 Installing the new ODD
Ê Install the ODD as described in section "Installing the ODD" on page 300.
12.4.8 Connecting the cables to the ODD
Ê Connect the cables to the ODD as described in section "Connecting the
cables to the ODD" on page 301.
12.4.9 Concluding steps
Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Enabling BitLocker functionality" on page 94
5. "Closing the rack door" on page 73