66 Upgrade and Maintenance Manual
RX100 S7
Basic hardware procedures
4.6 Closing the server
V CAUTION!
●
Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
●
The top cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
●
Follow the safety instructions in chapter "Important information" on
page 43.
Figure 8: Attaching the top cover
Ê Place the top cover on the server (1).
Make sure that each bolt is positioned in the corresponding nut.
Ê Push the top cover as far as it will go in the direction of the arrow (2).
0
/
To Next Page
Loading...
