Fujitsu PRIMERGY RX100 S7 - Removing the Front VGA;LAN Module; Installing the Dummy Cover

338 Upgrade and Maintenance Manual RX100 S7
Management and diagnostics modules
14.3.2.7 Removing the front VGA/LAN module
Figure 231: Removing the front VGA/LAN module
Ê Press the locking mechanism down (1).
Ê Push the front VGA/LAN module frontward (2) and out of the bay.
14.3.2.8 Installing the dummy cover
Figure 232: Installing the dummy cover
Ê Push the dummy cover inward until it engages at the right side.
/
0