Fujitsu PRIMERGY RX100 S7 - Expansion Cards and Riser Modules; Installing an Expansion Card in Riser Module 1; Preliminary Steps; Required Tools

RX100 S7 Upgrade and Maintenance Manual 199
Expansion cards and backup units
9.4 Expansion cards and riser modules
9.4.1 Installing an expansion card in riser module 1
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
9.4.1.1 Required tools
● Preliminary and concluding steps: tool-less
● Main steps: tool-less
9.4.1.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling SVOM boot watchdog functionality" on page 76
3. "Disabling BitLocker functionality" on page 75
4. "Shutting down the server" on page 59
5. "Extending/removing the server from the rack" on page 60
6. "Opening the server" on page 64
Upgrade and Repair Units (URU)
Additional task duration for FW update: 5 minutes
Average task duration: 10 minutes