RX100 S7
Upgrade and Maintenance Manual 355
System board and components
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
15.2.2 Removing the UFM
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
15.2.2.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps:
– Phillips PH1 / (+) No. 1 screw driver
– long nose pliers
– combination pliers
15.2.2.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling SVOM boot watchdog functionality" on page 76
3. "Disabling BitLocker functionality" on page 75
4. "Shutting down the server" on page 59
5. "Extending/removing the server from the rack" on page 60
6. "Opening the server" on page 64
Field Replaceable Units (FRU)
Average task duration: 5 minutes
To Next Page
Loading...
