RX100 S7
Upgrade and Maintenance Manual 269
10 Main memory
The system board offers four slots for memory modules.
V CAUTION!
●
Do not install unsupported third party memory modules. For further
information on supported memory modules, refer to section "Types of
memory modules" on page 271. Doing so may cause electric shock,
a fire, or failures.
●
Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
●
Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
●
If the memory module has not been correctly inserted, it may cause
a fire. Insert the memory module with attention to its direction.
●
Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
To Next Page
Loading...
