280 Upgrade and Maintenance Manual
RX100 S7
Processor
11.2 Replacing the processor
V CAUTION!
Processors are modules which are extremely sensitive to electrostatic
discharges and therefore must always be handled with care. After a
processor has been removed from its protective sleeve or from its
socket, place it with its smooth side down on a non-conducting, antistatic
surface. Never push a processor over a surface.
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
11.2.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps:
– Phillips PH2 / (+) No. 2 screw driver
– lint-free cloth
Field Replaceable Units (FRU)
Additional task duration for BIOS Flash: 5 minutes
Average task duration: 15 minutes
To Next Page
Loading...
