Fujitsu PRIMERGY RX100 S7 - Expansion Card Slot Brackets; Installing Expansion Card Slot Brackets; Required Tools

RX100 S7 Upgrade and Maintenance Manual 183
Expansion cards and backup units
I For the installing order see the configurator provided for the RX100 S7:
http://ts.fujitsu.com/products/standard_servers/index.htm (the EMEA market)
http://jp.fujitsu.com/platform/server/primergy/system/ (the Japanese market)
9.2 Expansion card slot brackets
9.2.1 Installing expansion card slot brackets
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
9.2.1.1 Required tools
● Phillips PH2 / (+) No. 2 screw driver
4. PCI-Express x1
controller
PCI bus type Max pcs per
system
Slot no Forbidden
slot
1 2 3
Adaptec SCSI Card ASC-
29320LPE
S26361-F3270-E201
4 GB/s 1 - - 1 1, 2
Nvidia NVS300
S26361-F2748-E633
1-121
Intel Gigabit CT Desktop
Adapter
S26361-F3516-E201
(Shelter Island)
2-121
S26361-F3749-Exxx
USB3.0 PCIe x1 adapter
card
1-1-1, 3
Upgrade and Repair Units (URU)
Average task duration: 5 minutes