Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

RX100 S7 Upgrade and Maintenance Manual
Version history
Issue number Reason for update
1.0 / June 2011 First version
2.0 / August 2011 Update new hardware:
– new chassis
– new redundant PSU cage
– new BBU holder
–RAID kit
3.0 / November 2011 Update new hardware:
– new BBU
4.0 / March 2012 Cautions about restoring BIOS settings
5.0 / May 2012 New model RX100 S7p, FBU, changed handling
thermal paste
6.0 / December 2012 Added fan test procedure, changed photos of SFP+
transceiver modules
7.0 / June 2013 Correction PCI slot numbers on page 444
8.0 / October 2013 Deleted ENERGY STAR, updated fan test procedure
9.0 / December 2013 Caution added on page 206 and page 214

Fujitsu PRIMERGY RX100 S7 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	Rack
Memory Type	DDR3
Storage	SATA, SAS, SSD
Drive Bays	4 x 3.5" or 8 x 2.5"
RAID Support	Optional RAID controller cards
Network	Gigabit Ethernet
Network Controller	Intel I350
Power Supply	Redundant or Non-redundant
Operating System Support	Windows Server, Linux, VMware