Fujitsu PRIMERGY RX100 S7 - Removing the Retaining Spring from the ODD; Removing the ODD

304 Upgrade and Maintenance Manual RX100 S7
Optical disk drive
12.3.4 Removing the ODD
Figure 201: Removing the ODD
Ê Press the retaining spring in direction of the arrow until it disengages (1).
Ê Push the ODD out of the bay (2).
12.3.5 Removing the retaining spring from the ODD
Figure 202: Removing the retaining spring from the ODD
Ê Remove the two screws (see circles).
Ê Remove the retaining spring.
햲
햳