RX100 S7
Upgrade and Maintenance Manual 369
System board and components
I For detailed information on how to access the BIOS and modify
settings, refer to the "System Board D3034 BIOS Setup Utilty"
reference manual available online at http://manuals.ts.fujitsu.com
(http://jp.fujitsu.com/platform/server/primergy/ manual/ for the Japanese
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server.
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Disabling BitLocker functionality" on page 75
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
6. "Removing the system board" on page 378
15.3.2.3 Removing the TPM
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 254: Removing the TPM screw
Ê Locate the slotted lower end of the TPM screw (1).
/
0
1
To Next Page
Loading...
