Fujitsu PRIMERGY RX100 S7 - Removing the UFM Spacer from the New UFM; Removing the Riser Module 2; Removing the Defective UFM

RX100 S7 Upgrade and Maintenance Manual 359
System board and components
15.2.3.3 Removing the riser module 2
Ê Remove the riser module 2 as described in section "Removing the riser
module 2" on page 352.
15.2.3.4 Removing the defective UFM
Ê Remove the UFM as described in section "Removing the defective UFM" on
page 356.
15.2.3.5 Removing the UFM spacer from the new UFM
Figure 245: Removing the UFM spacer
Ê Remove the nylon screw from the UFM (1).
Ê Remove the UFM spacer (2).
/
0