Fujitsu PRIMERGY RX100 S7 - Installing the New 2.5-Inch SAS;SATA Backplane

RX100 S7 Upgrade and Maintenance Manual 157
Hard disk drives / solid state drives
7.1.5.5 Installing the new 2.5-inch SAS/SATA backplane
Figure 73: Installing the 2.5-inch SAS/SATA backplane
Ê Position the SAS/SATA backplane on the bolts.
Ê Push the SAS/SATA backplane downward. Make sure that the lower cant of
the SAS/SATA backplane fits in the guides.
V CAUTION!
Ensure that none of the cables are strained or damaged!