386 Upgrade and Maintenance Manual
RX100 S7
Cables
16.1.3 Removing the SATA cables
Figure 260: Disconnecting the SATA cables from the SAS/SATA backplane
Ê Disconnect the two (3.5-inch configuration) or four (2.5-inch configuration)
SATA cables from the SAS/SATA backplane.
Figure 261: Disconnecting the SATA cables from the system board
Ê Disconnect the two (3.5-inch configuration) or four (2.5-inch configuration)
SATA cables from the system board.
Ê Remove the SATA cables.
To Next Page
Loading...
