RX100 S7
Upgrade and Maintenance Manual 315
Front panel
13.1.6 Connecting the front panel cable
Figure 208: Connecting the front panel cable
Ê Connect the front panel cable to the front panel module.
13.1.7 Concluding steps
Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Enabling SVOM boot watchdog functionality" on page 89
4. "Using the Chassis ID Prom Tool" on page 97
5. "Switching on the server" on page 72
6. "Verifying system information backup / restore" on page 83
7. "Enabling BitLocker functionality" on page 94
8. "Closing the rack door" on page 73
To Next Page
Loading...
