Fujitsu PRIMERGY RX100 S7 - Disconnecting the Front VGA Cable from the System Board; Removing the Front VGA;LAN Module

418 Upgrade and Maintenance Manual RX100 S7
Cables
16.9.6 Disconnecting the front VGA cable from the
system board
Figure 303: Disconnecting the front VGA cable from the system board
Ê Disconnect the front VGA cable from the system board connector "FRONT
VGA".
16.9.7 Removing the front VGA/LAN module
Figure 304: Removing the front VGA/LAN module
Ê Press the locking mechanism down (1).
Ê Push the front VGA/LAN module frontward (2) and out of the bay.
/
0