RX100 S7
Upgrade and Maintenance Manual 101
6 Power supply
In its basic configuration, the server has a standard power supply unit or one
power supply module that adjusts automatically to any mains voltage in the
range of 100 VAC to 240 VAC. Besides the power supply module, a second
power supply module can be installed optionally to serve as a redundant power
supply. If one power supply module fails, the second power supply module in
the redundant configuration ensures operation can continue uninterrupted.
V CAUTION!
●
Do not disassemble the power supply unit. Doing so may cause
electric shock.
●
Areas around the power supply unit may remain extremely hot after
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
●
When installing the power supply unit, be sure to confirm that the
connector of the power supply unit is not damaged or bent.
●
Do not insert your hands in the power supply unit slot when removing
the power supply unit. Doing so may cause electric shock.
●
If the power supply unit is hard to remove, do not pull out it by force.
●
The power supply unit is heavy, so handle it carefully. If you drop it by
mistake, injuries may result.
To Next Page
Loading...
