Fujitsu PRIMERGY RX100 S7 - Installing the 2.5-Inch HDD;SSD Module

148 Upgrade and Maintenance Manual RX100 S7
Hard disk drives / solid state drives
7.1.2.4 Installing the 2.5-inch HDD/SSD module
Figure 67: Unlocking the 2.5-inch HDD/SSD module
Ê Release the locking mechanism as follows:
1. Press the two green tabs of the locking lever together (1).
2. Push the handle of the HDD/SSD module fully in the direction of the
arrow (2). The HDD/SSD module is now unlocked.
/
/
0