276 Upgrade and Maintenance Manual
RX100 S7
Main memory
10.4 Replacing a memory module
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 43.
10.4.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Main steps: tool-less
10.4.2 Preliminary steps
Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Disabling SVOM boot watchdog functionality" on page 76
4. "Disabling BitLocker functionality" on page 75
5. "Shutting down the server" on page 59
6. "Extending/removing the server from the rack" on page 60
7. "Opening the server" on page 64
8. "Locating the defective component" on page 58
10.4.3 Removing the defective memory module
Ê Remove the memory module as described in section "Removing a memory
module" on page 275.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
To Next Page
Loading...
