Fujitsu PRIMERGY RX100 S7 - Removing the Dummy Cover (if Applicable); Removing the Power Supply Modules

RX100 S7 Upgrade and Maintenance Manual 131
Power supply
6.3.3.3 Removing the dummy cover (if applicable)
Figure 50: Removing the dummy cover
Ê Press the two grips together as indicated by the arrows (1) and remove the
dummy cover (2).
6.3.3.4 Removing the power supply modules
Figure 51: Unlocking and removing the power supply module
Ê Push the handle of the power supply module halfway upward in the direction
of the arrow (1).
1
0
0
0
1
1