124 Upgrade and Maintenance Manual
RX100 S7
Power supply
Ê Lay the power cord in the cable tie.
Ê Connect the power cord to the power supply module.
Ê Close the cable tie.
Ê Connect the power cord to the mains.
6.3.1.7 Checking the power supply modules
Ê Check whether the power supply modules work properly.
A power supply module works properly when the indicator (1) in figure 44
lights green. For more information see section "Connectors and indicators"
on page 447.
Figure 44: Indicator on the power supply module
6.3.1.8 Concluding steps
Ê Perform the following procedures:
1. "Closing the rack door" on page 73
0
To Next Page
Loading...
