Fujitsu PRIMERGY RX100 S7 - Page 22

Upgrade and Maintenance Manual RX100 S7
Contents
14.3.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 340
14.3.3.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 340
14.3.3.3 Removing the riser module 1 . . . . . . . . . . . . . . . . 340
14.3.3.4 Removing the front LAN card . . . . . . . . . . . . . . . . 340
14.3.3.5 Disconnecting the front LAN cable from the front LAN card 341
14.3.3.6 Disconnecting the front VGA cable from the system board . 341
14.3.3.7 Removing the defective front VGA/LAN module . . . . . . 341
14.3.3.8 Installing the new front VGA/LAN module . . . . . . . . . . 341
14.3.3.9 Connecting the front VGA cable to the system board . . . . 341
14.3.3.10 Connecting the front LAN cable to the front LAN card . . . 341
14.3.3.11 Installing the front LAN card . . . . . . . . . . . . . . . . . 341
14.3.3.12 Installing the riser module 1 . . . . . . . . . . . . . . . . . 342
14.3.3.13 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 342
14.3.4 Replacing the front LAN card . . . . . . . . . . . . . . . . . . 343
14.3.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 343
14.3.4.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 343
14.3.4.3 Removing the riser module 1 . . . . . . . . . . . . . . . . 343
14.3.4.4 Removing the defective front LAN card . . . . . . . . . . . 343
14.3.4.5 Disconnecting the front LAN cable from the front LAN card 344
14.3.4.6 Connecting the front LAN cable to the new front LAN card . 344
14.3.4.7 Installing the new front LAN card . . . . . . . . . . . . . . 344
14.3.4.8 Installing the riser module 1 . . . . . . . . . . . . . . . . . 344
14.3.4.9 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 345
15 System board and components . . . . . . . . . . . . . . . 347
15.1 Lithium battery . . . . . . . . . . . . . . . . . . . . . . . . . 348
15.1.1 Replacing the lithium battery . . . . . . . . . . . . . . . . . . 348
15.1.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 348
15.1.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 349
15.1.1.3 Replacing the defective lithium battery . . . . . . . . . . . 349
15.1.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 350
15.2 USB Flash Module (UFM) . . . . . . . . . . . . . . . . . . . 351
15.2.1 Installing the UFM . . . . . . . . . . . . . . . . . . . . . . . . 351
15.2.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 352
15.2.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 352
15.2.1.3 Removing the riser module 2 . . . . . . . . . . . . . . . . 352
15.2.1.4 Installing the UFM . . . . . . . . . . . . . . . . . . . . . . 353
15.2.1.5 Installing the riser module 2 . . . . . . . . . . . . . . . . . 354
15.2.1.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 354
15.2.1.7 Software configuration . . . . . . . . . . . . . . . . . . . 354