Fujitsu PRIMERGY RX100 S7 - Page 30

30 Upgrade and Maintenance Manual RX100 S7
Introduction
Model lines for RX100 S7
There are two model lines for the RX100 S7 server:
– RX100 S7
– RX100 S7p
The following table provides an overview of the different features:
I For the European market:
You can identify the model line by the model name "RX100 S7p" printed
on the identification rating plate and on the ID card.
I For the Japanese market:
"RX100 S7p" is not used as the model name in the Japanese market.
You can identify the model line by the product number: The product
number "PYR10Pxxx" means RX100 S7p.
RX100 S7 RX100 S7p
System board D3034-Axx D3034-Bxx
Processors Intel
®
XEON
®
E3-1200
processor series
Intel
®
Pentium
®
/ Celeron
®
processor series
Intel
®
Core™ i3-2100
processor series
Intel
®
XEON
®
E3-1200v2
processor series
Intel
®
Pentium
®
/ Celeron
®
processor series
Intel
®
Core™ i3
processor series
Main Memory DDR3 UDIMM with 1333 MHz
speed
up to 21 GB/s bandwidth in
dual channel mode and 10.6
GB/s in single channel mode
DDR3 UDIMM with 1600 MHz
speed
up to 25.6 GB/s bandwidth in
dual channel mode and 12.8
GB/s in single channel mode
PCI slots 1x PCIe x4 Gen 2 (internal
only for SAS controller)
1x PCIe x16 Gen 2
1x PCIe x1 Gen 2
1x PCIe x4 Gen 2 (internal
only for SAS controller)
1x PCIe x16 Gen 3
1x PCIe x1 Gen 2
Table 1: Differences between RX100 S7 and RX100 S7p