RX100 S7
Upgrade and Maintenance Manual 79
Basic software procedures
Ê If performing an offline driver update, first of all prepare the ServerView
Update DVD:
Ê Download the latest ServerView Update DVD image from the Fujitsu
FTP server at:
ftp://ftp.ts.fujitsu.com/images/serverview
Ê Burn the image to a DVD.
For the Japanese market:
Ê Locate, download and burn the ServerView Update DVD image available
from the following URL:
http://jp.fujitsu.com/platform/server/primergy/products/note/svsdvd/dvd/
Ê Ensure that all external I/O connections have been removed from the server.
I Ensure that all external I/O connections are uniquely identified so that
you can reconnect them into their original locations after concluding
the task.
Ê Switch on the server.
Ê Right after switching on the server, insert the ServerView Suite DVD 1 into
the DVD drive and close the drive tray.
The server will now boot from the DVD.
Ê After the boot process is complete, select your preferred GUI language.
Ê In the initial Installation Manager startup window, choose either Update
Manager Express or PrimeCollect from the Installation Manager mode section.
Ê Click Continue to proceed.
If Update Manager Express has been selected, insert the ServerView Update
DVD into the DVD drive before proceeding.
Ê Finish the intended maintenance task. For further information, refer to the
following manuals:
– ServerView Update Manager Express:
"Local System Update for PRIMERGY Servers" user guide
– PrimeCollect:
"PrimeCollect" user guide
To Next Page
Loading...
