GBC AdvancedPunch Pro - Page 17

GBC AdvancedPunch Pro 11/07/2018 Service Manual
xvii
Operational Safety
Do not operate the GBC AdvancedPunch Pro with the interlocks
defeated.
Use care when a procedure in this Manual instructs you to “insert an
Interlock Cheater into the Punch Door interlock Switch SW1,” in order to
test the operation of a component.
WARNING
Moving Parts, keep hands clear of nips and the belts when the
Interlock Cheater is inserted.
Do not open any panels other than those indicated by this Manual.
• Pay particular attention to the WARNINGS and CAUTIONS listed in
the Operator Manual.
Warnings and Cautions
Pinch Points
WARNING
Moving Parts, keep hands clear of the belts when the Rear Cover
Assembly is removed.
The Punch Module Motor Belt (PL 3.1) is a potential pinch point.
Shock Hazard
WARNING
Electrical Shock Hazard.
Do not open. No user serviceable parts inside. Refer servicing to
qualified service personnel.
The electrical components behind the Rear Cover Assembly (PL 2.6) are
a potential shock hazard.