94 Matrix ETERNITY NE System Manual
• Walk-Out when user gives command to Walk-Out: Select this option, if you want to assign Walk-In
until Logout to the extension.
Call Forward
1. Click [ + ] Call Forward to expand.
2. Set the Call Forward No Reply Timer (sec) to the desired value, if required. The range of this timer is .
Default: 030 seconds.
Call Forward No Reply Timer signifies the duration for which the system will wait for an extension to
answer an incoming call, before forwarding the call it to the programmed destination phone number as Call
Forward-No Reply. By default the Timer is set to 30 seconds. Refer the feature description for “Call
Forward” to know more.
3. Select the type of calls to be forwarded If Call is forwarded on external number. You may select from the
following options:
• Forward only Internal calls
• Forward only Trunk calls
• Forward all calls (internal as well as trunk calls)
Default: Forward only Trunk calls.
This parameter is relevant for the features “Call Forward” and “Mobility Extension”.
More Features
1. Click More... link to expand.
To Next Page
Loading...
