Matrix ETERNITY NE System Manual 425
If you are using a DSS Key for the Call Logs feature, whenever there is a missed call, the LED of the DSS
key will glow. If you press the Call Logs key, the system will display the last missed call details.
To view Call Logs on DKP from Phone Menu:
• Press Enter key when the phone is idle.
• Place your cursor on Call Logs option, press Enter key.
• Scroll with the Up/Down Navigation Key to reach the desired Call Log: Missed, Answered, Dialed.
• Press Enter key to select the desired Call Log.
• The phone will display the call log details by: <Name> <Date> <HH:MM>
• Press Enter key.
• The phone will display the Number: <XXXXXXXXXXX>
• To view another call log, scroll with the Back Navigation key to return to the previous option.
• You may exit the Phone Menu by going ON-Hook or pressing the Cancel key.
• If there is no name in the CLI, the Call Log will only display the number.
• If you press the 'Enter' key, the system will dial out the number you just viewed.
To view Call Logs on DKP using DSS Key:
• Press DSS Key programmed for Call Logs, when the phone is idle.
• Scroll to select the desired Call Log Call Log: Missed, Answered, Dialed.
• Follow the same steps as described for viewing Call Log entries using the Phone Menu.
OR
• Press the DSS Key assigned the Call Logs feature, when it glows.
• The phone will display the call log details of the last missed call by: <Name> <Date> <HH:MM> (only if
name is received).
• Press Enter key.
• The phone will display the Number: <XXXXXXXXXXX>
• You may exit the Phone Menu by going OFF-Hook or pressing the Cancel key
20
.
• You may also edit or store the number.
• You may scroll with the < Back navigation key to view the other call logs.
• The LED of the Call Logs DSS key will be turned off once you have viewed the missed call.
Editing Numbers in Call Logs
• Go to Call Logs from the Phone Menu or by pressing Call Logs DSS Key. (see instructions given above).
• Scroll with the Up/Down Navigation Key to reach the desired Call Log: Missed, Answered, Dialed.
• Press Enter key to select the desired Call Log.
• The phone will display the call log details by: <Name> <Date> <HH:MM>
• Press Enter key.
• The phone will display the Number: <XXXXXXXXXXX>
• To edit the number, move the cursor with the Front and Back navigation key.
• Place the cursor under the digit you want to delete.
• Press 'Transfer' key to delete a digit.
• To insert a digit, place the cursor where you want to insert the digit, and enter the digit using the dial pad.
The digit will be inserted in the number string accordingly.
• Repeat the same to delete/insert another digit.
• After editing the number, you may store it in the Personal Directory or dial the edited number by pressing
the Enter key.
20. This key is available on EON48. This key must be programmed on EON42.
To Next Page
Loading...
