Matrix ETERNITY NE - Alarm Set by Extension Users; Once Only; Daily Alarm

Matrix ETERNITY NE System Manual 877
• Click Submit to save changes.
• Log out of Jeeves.
How to use
Alarm set by Extension Users
• Pick up the handset of your telephone and dial 163  VMS prompts: "Enter the time, HH MM in twenty four
hour format
66
. To cancel all alarms, press '# (pound/hash)'." (EntertimeI.wav)
• If no time is entered, VMS prompts: "You have not entered any input" (NoInput.wav)
• If invalid time is entered, VMS prompts: "You have entered invalid input." (InvalidInput.wav)
• To set alarm, dial valid time  VMS prompts: "To set once, Press '1', To set Daily Press '2'."
(SetOnceDaily.wav)
Once Only
•Dial 1  VMS responds with: "You have set Wake up Alarm at …." (WakeupVeri.wav) followed by the
prompt: To Confirm
67
, Press 1, To Re-enter, Press 2." (AlarmConf.wav).
• Dial 1 to confirm the time set for alarm  VMS responds with: "Your Wake up Alarm is set."
(WakeupSet.wav) followed by the prompt: "Thanks for using this Service." (Thankservice.wav)
• If alarm is not set, the VMS responds with: "Sorry! Your Wake Up Alarm cannot be set. Please call
Operator for further assistance." (AlarmNoset.wav). VMS further responds with: "Thanks for using this
Service." (Thankservice.wav)
Daily Alarm
•Dial 2  VMS responds with: "You have set Daily Wake up Alarm at …." (DailyWakeupVeri.wav) followed
by the prompt: "To Confirm, Press 1, To Re-enter, Press 2." (AlarmConf.wav)
• Dial 1 to confirm the time set for alarm  VMS responds with: "Your Daily Wake up Alarm is set."
(DailyWakeupSet.wav) followed by the prompt: "Thanks for using this Service." (Thankservice.wav)
• If no alarm is set, the VMS responds with: "Sorry! Your Wake Up Alarm cannot be set. Please call
Operator for further assistance." (AlarmNoset.wav). The VMS further responds with: "Thanks for using
this Service." (Thankservice.wav)
• Dial # (pound/hash) to cancel all alarms  VMS responds with: "Your all Wake up Alarm are cancelled."
(WakeupCancel.wav) followed by the prompt: "Thanks for using this Service." (Thankservice.wav)
• If no alarms are set, the VMS responds with: "Sorry! There is no Alarm to cancel." (Alarmnocancel.wav)
followed by the prompt: "Thanks for using this Service." (Thankservice.wav).
66.The Date and time format depends on the Region/Country selected for the system.
67. This option will not be played if Alarm Verification is disabled in the System Parameters.