Matrix ETERNITY NE - Interrupt Request Timer; Changing Interrupt Request Timer Using Jives

624 Matrix ETERNITY NE System Manual
• “Priority”: No Interaction with Interrupt Request. If 'A' has lower priority than 'B' but has Interrupt Request
enabled; A can interrupt B.
How to configure
To be able to use Interrupt Request, extension users must have this feature enabled in their “Class of Service
(COS)” for the Day and Night time, as required.
See “Basic Settings” for instructions on configuring the different extension port types.
Interrupt Request Timer
Interrupt Request Timer is the time for which the extension on which interrupt request is made gets the beeps. By
default the Timer is set to 45 seconds. Default: 045 seconds, Valid Range: 001 to 255 seconds.
Changing Interrupt Request Timer using Jives
• Log in as System Engineer.
• Click Advanced Settings link.
• Click the link System Timers and Counts.