764 Matrix ETERNITY NE System Manual
• Exit SA mode.
Print Filter Settings - Incoming Calls
To set Print Filters for Outgoing Calls,
• Enter SA mode from an SLT/DKP/Extended IP phone.
• Dial the Commands listed in the table for the desired filter.
Set filters to Default 1072-120
Filter Commands Values
Calls received on Stations 1072-160-Extension No.-
Extension No.
Extension No.: 201 - 318
Calls received on CO Port 1072-161-CO-CO CO: 01 - 06
Calls received on Mobile Port 1072-165-Mobile-Mobile Mobile: 01-02
Calls received on SIP Trunk 1072-166-SIP-SIP SIP: 303 - 318
Print Normal Calls 1072-152-Flag Flag:
0 = Disable
1 = Enable
Print DID Calls 1072-153-Flag Flag:
0 = Disable
1 = Enable
Print Unanswered Calls 1072-154-Flag Flag:
0 = Disable
1 = Enable
Print DID Unanswered Calls 1072-155-Flag Flag:
0 = Disable
1 = Enable
Print DISA Calls 1072-156-Flag Flag:
0 = Disable
1 = Enable
Calls received between Date 1072-167-DD-MM-YYYY-DD-MM-
YYYY
DD: 01-31
MM: 01-12
YYYY: 0000-9999
Calls received between Time 1072-168-HH-MM-HH-MM HH: 00-23
MM: 00-59
Calls remain unanswered for
duration more than
1072-158-Seconds Seconds: 000-999
Calls kept on hold with duration
more than
1072-159-Seconds Seconds: 000-999
Filter Commands Value
To Next Page
Loading...
