Matrix ETERNITY NE System Manual 551
Navigating the Phone Menu
To navigate the menu,
• Tap on Enter key when the phone is idle.
• Scroll by tapping the Up/Down Navigation Key to reach the desired Menu option.
• Tap on Enter key to select the desired Menu option.
• Scroll by tapping on the Up/Down Navigation Key to reach the desired sub-menu option.
• Tap on Enter key to select the desired sub-menu option.
To exit menu, 
• Press Cancel key.
Or 
• Go ON-Hook.
Second Call Indication
When you are in an on-going conversation and there is a second incoming call, EON48P/48D-P/48S/48D-S will 
indicate the second incoming call by playing the Call Waiting Tone and displaying the Caller ID of extension/trunk 
on the LCD. If you are in the handset or headset mode, an audible Ring indicating an incoming call will be played 
on the speaker of the phone.  
Operating EON48
Please refer the User Card for EON48 for instructions on operating the features of ETERNITY using EON.
EONSOFT
The EONSOFT is a PC-based Digital Key Phone. Based on a graphic user Interface (GUI), the EONSOFT offers all 
the features of EON48, making it a substitute for the Digital Key Phone. Its integration with the ETERNITY obviates 
the need for a separate telephone instrument.
The EONSOFT can be installed on any personal computer with Windows or NT operating system.
Two PC-based DSS64 Consoles are available to be used with the EONSOFT. You can use either one or both 
DSS64 Consoles. 
Do Not Disturb To set/cancel Do Not Disturb on the phone, i.e. block incoming internal and external 
calls.
Call Cost Display To view the cost of calls made from the phone.
Hotline To set/cancel Hotline and Delayed Hotline.
Alarm To set/cancel Personalized and Automated Alarms.
Change User 
Password
To change User Password (required for using certain features like Call Follow Me, 
Dynamic Lock, DISA, Walk-In Class of Service, User Absent/Present, Hot Desk) and for 
customizing Phone Settings.
Phone Settings To customize settings of the phone such as Speech and  Ringer Controls, LCD Display 
settings (Brightness and Contrast, Backlight ON/OFF), Headset Connectivity, Call 
Answering Mode (manual/auto answer).
Menu option Description