590 Matrix ETERNITY NE System Manual
For this, a Time Table must be assigned to the Door Phone Port, defining the working days and
working hours. Destination Extensions must be defined for the Day and for Night. Similarly, if external
number is selected as landing destination for the Day or Night, the number must be configured.
ETERNITY NE will follow the Time Table you have set and route the calls according to the current time
of the day to the destination phone (extensions/external number) configured for the time of the day.
• The landing destination - Extension Group and the External Number - can be configured only by the
System Engineer (SE).
• The Routing Mode for Door Phone Calls, 'Scheduled' or 'At Wish' mode can be set by the System
Engineer as well as the extension users (User Mode). However, extension users must have the feature
“Door Phone Settings” enabled in their '“Class of Service (COS)”. With this feature included in their
Class of Service, the extension users can switch between At Wish and Scheduled modes by dialing the
Feature Command.
• The Time Table, the landing Extensions, and the External Number for routing the Door Phone Calls
can be programmed by the System Engineer only.
• The Outgoing Trunks selected for routing door phone calls to an external number will be common for
both Scheduled and At Wish modes.
How to install Door Phones
For step-by-step installation of a Door Phone, connecting it to the Door Phone Port of the ETERNITY NE,
connecting Door Lock release device, refer the topic “Connecting Door Phone”.
How to configure
For the Door Phone feature to work,
• Configure the related set of “Door Phone” parameters in “Basic Settings”.
•Allow 'Door Phone Settings' in the '“Class of Service (COS)” of extensions defined as the landing
destination for Door Phone calls. By default, it is enabled on all extension types, SLT, DKP and SIP
extensions.
• If a Door Lock is installed in conjunction with the Door Phone, enable the feature 'DOP Turn ON/OFF' in
the “Class of Service (COS)” of extension that are to be allowed to open the Door Lock. By default, it is
enabled on all extension types, SLT, DKP and SIP extensions.
How to use
To select a Call Routing Mode
55
:
Users world wide:
•Dial 1171-Access Code of the Door Phone-1 for Scheduled.
•Dial 1171-Access Code of the Door Phone-2 for At Wish.
Users in the Philippines:
55. Manually by the user of the extension configured as the landing destination for the Door Phone calls.
To Next Page
Loading...
