Matrix ETERNITY NE System Manual 249
• To enable the DHCP Server, set Start DHCP Server? to Yes. Default: No.
• In the Start IP Address field, define the starting IP Address to be assigned to DHCP client. ETERNITY will
allocate the first available free IP Address to DHCP clients.
• In the Number of Hosts field, define the maximum number of DHCP Clients to be assigned IP Addresses
by the DHCP server. You can define the Number of Hosts from 2 to 48. Default: 48.
• In the DNS Server Address field, enter the DNS address to be assigned to the DHCP Clients.
• Define the maximum Lease Time (hours) for which the IP Addresses should be allocated to the DHCP
Clients. The Lease Time may be from 1 to 192 hours. Default: 24 hours.
DHCP client should renew its lease within the Lease Timer. If the client does not renew its lease before the
expiry of the configured Lease Time, ETERNITY will free the IP Address. This IP Address may be
assigned to another DHCP client.
Web Server Port
• ETERNITY NE has an embedded web server called Jeeves, for system configuration. You may change
the Web Server Port for accessing Jeeves, as per your requirement. Valid range of the port is: 80, 1024-
65535. Default: 80
Click Submit to save settings.
To Next Page
Loading...
