Matrix ETERNITY NE - Alarm Set by Operator

878 Matrix ETERNITY NE System Manual
Alarm set by Operator
• Enter System Adminstrator Mode, dialing 1072.
• Dial 034  the VMS prompts: "Enter the Extension number for which you have to set or cancel Wake Up
Alarm." (RemoteExt.wav)
• Dial 1 to select the extension user for which the Alarm is to be set. VMS responds with: "Enter the time, HH
MM in twenty-four hour format. To cancel all alarms, press '#’ (pound/hash)'." (EntertimeI.wav)
• If no time is entered, the VMS prompts: "You have not entered any input" (NoInput.wav)
• If invalid time is entered, the VMS prompts: "You have entered invalid input." (InvalidInput.wav)
• To set alarm, dial valid time  VMS prompts: "To set once, Press '1', To set Daily Press '2'."
(SetOnceDaily.wav)
Once Only
•Dial 1  the VMS responds with: "To set it as Personal, Press 1. To set it as Automated, Press 2."
(Alarmmode.wav)
• Dial 1  VMS responds with: "You have set Personal Wake up alarm at…." (PerWakeupVeri.wav)
followed by the prompt: "To Confirm, Press 1, To Re-enter, Press 2." (AlarmConf.wav)
• Dial 1  VMS responds with: "Your Personal Wake up Alarm is set." (PerWakeupSet.wav) followed by
the prompt: "Thanks for using this Service." (Thankservice.wav)
• If alarm is not set, the VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please call
Operator for further assistance." (AlarmNoset.wav) VMS further responds with: "Thanks for using this
Service." (Thankservice.wav)
OR
• Dial 2  the VMS responds with: "You have set Automated Wake up alarm at…."
(AutoWakeupVeri.wav) followed by the prompt: "To Confirm, Press 1, To Re-enter, Press 2."
(AlarmConf.wav)
• Dial 1  the VMS responds with: "Your Automated Wake up Alarm is set." (PerWakeupSet.wav)
followed by the prompt: "Thanks for using this Service." (Thankservice.wav)
• If alarm is not set, VMS responds with: "Sorry! Your Wakeup Alarm cannot be set. Please call
Operator for further assistance." (AlarmNoset.wav) VMS further responds with: "Thanks for using
this Service." (Thankservice.wav)
Daily Alarm
•Dial 2  VMS responds with: "To set it as Personal, Press 1. To set it as Automated, Press 2."
(Alarmmode.wav)
• Dial 1  VMS responds with: "You have set Daily Personal Wake up alarm at…."
(DailyPerWakeupVeri.wav) followed by the prompt: "To Confirm, Press 1, To Re-enter, Press 2."
(AlarmConf.wav)