Matrix ETERNITY NE System Manual

74 Matrix ETERNITY NE System Manual
Time Tables
Certain features of the ETERNITY NE like Operator, Class of Service, Toll Control, Outgoing Trunk Access, among
others
9
, require its trunks and extensions to behave differently according to the time of the day: Day (working
hours) and Night (non-working hours).
For example,
• incoming calls are to be routed to the extension of security personnel, instead of the Operator when the
office is closed.
• certain features in the Class of Service are to be allowed during the day (working hours), but not at night
(non-working hours).
• access to outgoing long distance calls is to be denied in the night hours.
• trunks must play a different greeting message to the callers during the day and a different message in the
night hours.
A Time Table is a schedule of Working Days and Day time (working hours) for the entire week. In a Time Table, you
can define the working days and working hours for the entire week.
Time Tables are applied to extensions and trunks defining the working hours and Day time for the entire week, so
that the system can execute the time-dependent features and facilities according to the Time Table.
ETERNITY NE offers 4 different Time Tables: the System Time Table (applied to all trunks and extensions and
Operator by default), and customized Time Tables - 1, 2, and 3 which you can set to your preferences and apply to
trunks and extensions.
You can assign different Time Tables to different trunks and extensions.
Refer the topic “Day Night Mode” to know more.
To configure,
1. Click the Time Table link.
9. Direct Inward Dialing, Direct Inward System Access, Trunk Landing extensions, Door Phone Call Routing.

Matrix ETERNITY NE Specifications

General

Brand	Matrix
Model	ETERNITY NE
Category	PBX
Language	English