Matrix ETERNITY NE - Setting Day;Night Mode from SA Mode Using Jeeves; Setting Day;Night Mode from SA Mode Using a Telephone

506 Matrix ETERNITY NE System Manual
Setting Day/Night Mode from SA mode using Jeeves
• Log in as System Administrator.
• Click Day/Night Mode to open the page.
• Select the desired option:
• Set System in Day Mode (Working Hrs)
• Set System in Night Mode (Non-Working Hrs)
• Operate System as per Timetable assignment (default).
• Click Submit at the bottom of the page.
• Log out of Jeeves or continue, as desired.
Setting Day/Night Mode from SA mode using a Telephone
• Enter SA mode from an SLT/DKP/Extended IP Phone.
• Dial 1072-018-Code
Where,
Code is from 1 to 3
1 is for Day Mode
2 is for Night Mode
3 is for Operate system as per Time Table.
• Exit SA mode.