240 Matrix ETERNITY NE System Manual
Emergency Numbers
• This page displays the default Emergency Numbers for the 'Region' you selected for the system. In
other words, it displays the Emergency Numbers specific to the country/region where the ETERNITY
NE is installed.
• The default Emergency Numbers that appear on this page are non-editable. All you need to do is to
select the Outgoing Trunks for each default Emergency Number.
For example, '112' is the default Emergency Number for the mobile network. So, you may select the
Mobile Trunk for dialing this number.
• You may add additional Emergency Numbers to the existing default numbers in the edit boxes and
select the Outgoing Trunks for these numbers.
Disclaimer: Matrix Comsec is responsible for incorrect configuration of Emergency Numbers.
1. To add an Emergency Number, Click the Emergency Numbers link below Basic Settings.
2. Enter the desired number in the field Route the Emergency Number.
To Next Page
Loading...
