Matrix ETERNITY NE - System Fault Log Display

Matrix ETERNITY NE System Manual 809
System Fault Log Display
What’s this?
The ETERNITY provides a facility to display the last fault monitored on the system on the System Administrator’s
extension phone.
How it works
To be able to use this feature optimally, the System Administrator extension phone must be a DKP or an Extended
IP Phone, and a DSS Key must be assigned on the phone to System Fault Log.
• When a fault occurs, the LED of the DSS Key assigned for the System Fault Log, glows.
• The System Administrator may press the DSS key or dial the System Fault Log feature access code to
acknowledge it.
• On pressing the DSS Key or dialing of the acknowledgment command, the LED of the Fault Log key is
turned OFF.
How to use
To view the System Fault Log from System Administrator Mode,
• Go Off-hook.
• Press the DSS key assigned to System Fault Log Display.
OR
•Dial 1072-010
• The Fault log appears on your phone’s display in this following format:Date-Time-Fault Index
The Date and Time are in <DD-MM-YYYY HH:MM:> format
The Activity Index is a two digit number from 01 to 12.
See System Fault Log Activity Index table in “System Fault Log”.