Matrix ETERNITY NE - Installing ETERNITY NE; Preparing for Installation

Matrix ETERNITY NE System Manual 17
CHAPTER 3 Installing ETERNITY NE
Preparing for Installation
Before you begin the installation of the ETERNITY NE, make sure you have the following items ready:
Have the listed below items ready:
• A suitable location to install the ETERNITY NE.
• Necessary telecom wiring in place, with wall jacks for extension lines at the required locations.
• Standard, good quality, twisted pair telephone cables with 0.5 mm conductor diameter, with RJ11 plug.
• A dedicated Power supply outlet close to the system.
• For the SLT ports, arrange for as many standard analog telephone instruments as required to connect as
SLT extensions. You may select any standard telephone instrument like rotary phone, Pulse/Tone
switchable push-button phone, Feature phone or Cordless phone.
• A fax machine, as required, to connect to SLT port.
• One or two digital key phones (Matrix proprietary phones), as required, to connect as DKP extensions.
• For the CO ports, arrange for one or more active Analog, two-wire trunk lines, as required.
• For the Mobile ports, A SIM card to test mobile network connectivity, if GSM/UMTS module is present.
• SIP Account information to be configured in the system to test SIP calls, if VoIP module is present.
• Any standard SIP Phone or Matrix Extended IP Phone to register as SIP Extension of ETERNITY NE, if
required. The first 8 SIP Extensions you connect are free.
To connect additional 8 SIP Extensions, you would need to purchase the IP8 License.
• If Voice Mail System module (VMS) is present, the Pen Drive and the License Voucher (provided by Matrix
with the VMS package).
• A standalone computer or a computer connected in a LAN to access Jeeves, the web-based configuration
tool of ETERNITY NE.