426 Matrix ETERNITY NE System Manual
The original number (you now changed) will remain unaffected in the Log. However, if you make a call to
the new number (you changed), it will be logged in the “Dialed” call log and the Last Number Redial list.
Making calls using Call Logs
• Go to Call Logs from the Phone Menu or by pressing Call Logs DSS Key.
• Scroll with the Up/Down Navigation Key to reach the desired Call Log: Missed, Answered, Dialed.
• Press Enter key to select the desired Call Log.
• The phone will display the call log details by: <Name> <Date> <HH:MM>
• Press Enter key.
• The phone will display the Number: <XXXXXXXXXXX>
• Press Enter key.
• The system will dial out the selected number using the Outgoing Trunks assigned for dialing ‘0’.
• The dialed number will be logged in the "Dialed" call log and the Last Number Redial List.
Storing numbers of Call Logs in Personal Memory of the DKP
To store any external call record (trunk call) from Received, Missed and Dialed call logs to Personal Directory,
• Scroll to the desired call log.
• Press Enter key to view the complete number.
• Edit the number (following instructions given above), if required.
• Press 'v' (Down Navigation key).
• You will get the prompt: "Enter Name"
21
.
• Enter the name of the contact.
• Press Enter key.
• You will get the confirmation message: "Stored at Memory: <XXX>".
• When you store the number in the Personal Directory, the system will automatically assign Trunk
Access Code "0".
• If all 25 Location Index Numbers of the Personal Directory are already programmed, the message
"Memory Full" will appear on your phone's display and you will get an Error Tone. Refer the topic
“Abbreviated Dialing” to know more.
21. Only if there is a free Memory Index in the Personal Directory.
To Next Page
Loading...
