Matrix ETERNITY NE System Manual 615
Hot Desking
What’s this?
Hot Desking enables extension users to use all the properties of their own extension from another extension.
Hot Desking is useful for people who are often away from their own desks and must work from another. Hot
Desking allows them to use all the features and facilities of their own extension from another.
How it works
This feature is supported on DKP and SLT extensions only.
Hot Desking is possible only between SLT-SLT and DKP-DP extensions.
The User Password of both extensions involved in Hot Desking must not be 1111.
Hot Desking can be performed only when both the extensions are idle.
To perform Hot Desking two extensions are required:
• The Host Extension - the extension whose user performs the Hot Desking.
• The Hot Desk Extension - the extension on which Hot Desking is performed.
• When Hot Desk is performed from the Hot Desking extension, all the properties of the Host Extension are
copied to the Hot Desk Extension.
• On the Host Extension, the user cannot perform any activity except Cancel Hot Desking.
• You must cancel Hot Desk from both the Hot Desk Extension and the Host Extension.
• After cancelling Hot Desk, the Host Extension and the Hot Desk Extension acquire their original properties.
How to configure
For this feature to work, the feature 'Hot Desk' must be enabled in the“Class of Service (COS)” of the Host
Extension and the Hot Desk Extension. By default, this feature is disabled on all extensions, so none of the
extensions can use this feature. To enable this feature in the COS of the extensions, see “SLT Extensions”, “DKP
Extensions”, “SIP Extensions” under “Basic Settings”.
How to use
For EON users
To perform Hot Desk:
• Go to the EON48 extension (Hot Desk Extension) with which you want to swap your EON48 extension
(Host Extension) properties.
• Press DSS Key assigned to Hot Desk.
OR
To Next Page
Loading...
