786 Matrix ETERNITY NE System Manual
• In the SMDR-OG Posting Protocol (Handshaking and OG Call Record Format) drop down list, select the
appropriate protocol to be used. Default: Matrix.
• In the Destination Port, select Ethernet. This is Ethernet Port of ETERNITY NE on which SMDR Posting
is set up. Default: None.
• In the Destination IP Address: Port field, enter the IP Address and port of the PC on which the CAS
server application software is running, i.e. where ETERNITY should post SMDR.
• In the Listening Port (of ETERNITY) for Posting field, enter the Port number at which ETERNITY must
listen for SMDR Posting. Default: 6000.
• To start SMDR posting, select Process as Start.
• Click Submit button to save settings.
Refining Handshake Parameters
You may need to refine some of the Handshake parameters of the selected SMDR-Posting protocol, i.e. change
the factory default values of the protocol, to match the software requirements of the CAS being used in the
To Next Page
Loading...
